The design of fuel cell systems is complex, and can vary significantly depending upon fuel cell type and application. However, several basic components are found in many fuel cell systems:
FUEL CELL STACK
The fuel cell stack is the heart of a fuel cell power system. It generates electricity in the form of direct current (DC) from electro-chemical reactions that take place in the fuel cell. A single fuel cell produces less than 1 V, which is insufficient for most applications. Therefore, individual fuel cells are typically combined in series into a fuel cell stack. A typical fuel cell stack may consist of hundreds of fuel cells. The amount of power produced by a fuel cell depends upon several factors, such as fuel cell type, cell size, the temperature at which it operates, and the pressure of the gases supplied to the cell. Learn more about the parts of a fuel cell.
FUEL PROCESSOR
The fuel processor converts fuel into a form usable by the fuel cell. Depending on the fuel and type of fuel cell, the fuel processor can be a simple sorbent bed to remove impurities, or a combination of multiple reactors and sorbents.
If the system is powered by a hydrogen-rich, conventional fuel, such as methanol, gasoline, diesel, or gasified coal, a reformer is typically used to convert hydrocarbons into a gas mixture of hydrogen and carbon compounds called “reformate.” In many cases, the reformate is then sent to a set of reactors to convert carbon monoxide to carbon dioxide and remove any trace amounts of carbon monoxide remaining and a sorbent bed to remove other impurities, such as sulfur compounds, before it is sent to the fuel cell stack. This process prevents impurities in the gas from binding with the fuel cell catalysts. This binding process is also called “poisoning” because it reduces the efficiency and life expectancy of the fuel cell.
Some fuel cells, such as molten carbonate and solid oxide fuel cells, operate at temperatures high enough that the fuel can be reformed in the fuel cell itself. This process is called internal reforming. Fuel cells that use internal reforming still need traps to remove impurities from the unreformed fuel before it reaches the fuel cell. Both internal and external reforming release carbon dioxide, but due to the fuel cells’ high efficiency, less carbon dioxide is emitted than by internal-combustion engines, such as those used in gasoline-powered vehicles.
POWER CONDITIONERS
Power conditioning includes controlling current (amperes), voltage, frequency, and other characteristics of the electrical current to meet the needs of the application. Fuel cells produce electricity in the form of direct current (DC). In a DC circuit, electrons flow in only one direction. The electricity in your home and workplace is in the form of alternating current (AC), which flows in both directions on alternating cycles. If the fuel cell is used to power equipment that uses AC, the direct current will have to be converted to alternating current.
Both AC and DC power must be conditioned. Current inverters and conditioners adapt the electrical current from the fuel cell to suit the electrical needs of the application, whether it is a simple electrical motor or a complex utility power grid. Conversion and conditioning reduce system efficiency only slightly, around 2%–6%.
AIR COMPRESSORS
Fuel cell performance improves as the pressure of the reactant gases increases; therefore many fuel cell systems include an air compressor, which raises the pressure of the inlet air to 2–4 times the ambient atmospheric pressure. For transportation applications, air compressors should have an efficiency of at least 75%. In some cases, an expander is also included to recover power from the high pressure exhaust gases. Expander efficiency should be at least 80%.
HUMIDIFIERS
The polymer electrolyte membrane at the heart of a PEM fuel cell does not work well when dry, so many fuel cell systems include a humidifier for the inlet air. Humidifiers usually consist of a thin membrane, which may be made of the same material as the PEM. By flowing dry inlet air on one side of the humidifier and wet exhaust air on the other side, the water produced by the fuel cell may be recycled to keep the PEM well hydrated.
Reprinted from https://www.energy.gov/eere/fuelcells/fuel-cell-systems
Disclaimer: For reference and exchange purposes only, if copyright and other issues are involved, please contact us for deletion, thank you!
