Project Description

Ultrasonic Blood Collection Tube Spraying

Blood collection tubes are the most common type of medical supplies used in hospitals. Blood vessels will be sprayed anticoagulants, the purpose is to prevent blood clots. Blood anticoagulant blood collection tube is very small, evenly distributed in the test tube wall, it can quickly mix thoroughly with the blood to prevent abnormal blood results.

The existing blood collection tube coating methods and devices there are many deficiencies. The traditional spray device for blood collection tube spraying, prone to material aggregation or condensation phenomenon, resulting in the rough surface of the blood collection tube or prone to spray a large number of dead spots, spray uneven area of more than 20%. Spray coating method and the more costly materials, material utilization is low, only 5%.

CHEERSONIC ultrasonic developed ultrasonic blood vessel spraying equipment. The device has the advantages of simple structure, solves the problems of uneven sprayed coating and expensive sprayed material in the traditional spraying method.

Ultrasonic spraying steps:

1.Blood collection tube cleaning and disinfection.
2.Preparation of spray solution, scaffold cleaning and disinfection, the preparation of anticoagulant solution and mix well.
3.Spray the drug coating, the prepared spray solution was added to the solution bottle, connected to ultrasonic blood collection tube spraying equipment power, atomization frequency of 40khz-120khz, atomized spray solution, the droplet after the nozzle deposition in the blood collection tube The surface of the inner wall to form a uniform drug coating (spray time 0.5-2 minutes).
4.The coating is dry. As atomized particles are extremely small (around 25 microns), they dry naturally in a short period of time (within tens of seconds).